The standard order of accessing modes on a Cisco device

The standard order
of accessing modes on a Cisco device (like a router or switch)
running IOS or IOS XE is:

✅ User EXEC mode → Privileged EXEC mode →
Global Configuration mode → Specific Configuration modes

📘 Detailed Order:

1. User EXEC Mode (>)
• Access level: Basic
• Prompt: Router>
• Limited commands (e.g., ping, show
  version)
• Entry point when you first log in
2. Privileged EXEC Mode (#)
• Access level: Elevated
• Prompt: Router#
• Accessed using: enable
• Allows full monitoring and some
  configuration
3. Global Configuration Mode ((config)#)
• Prompt: Router(config)#
• Accessed using: configure terminal
• Allows device-wide configuration changes
4. Specific Configuration Modes
• Examples:
• Interface mode: Router(config-if)#
• Line mode: Router(config-line)#
• Router protocol mode: Router(config-router)#
• Accessed by entering sub-configuration
  commands from global config

✅ Summary of Command Flow:

plaintext

CopyEdit

User EXEC Mode        →      
enable

   Router>                   ─────────►  
Router#

                                     
Privileged EXEC Mode

Privileged EXEC
Mode  →  
configure terminal

   Router#                   ─────────►   Router(config)#

                                      Global
Configuration Mode

Global Config
Mode    →   interface Gig1/0

   Router(config)#            ─────────►  
Router(config-if)#

                                      Specific
Config Mode