Step 1. Check the Version of code already running and please read the release notes carefully.
|
CPI20/admin# show ver
Cisco Application Deployment Engine OS Release: 2.0
ADE-OS Build Version: 2.0.6.003-px-build
ADE-OS System Architecture: x86_64
Copyright (c) 2005-2010 by Cisco Systems, Inc.
All rights reserved.
Hostname: CPI20
Version information of installed applications
———————————————
Cisco Prime Infrastructure
——————————————
Version :
2.0.0.0.294 ————————–<<< Current version |
Step 3. Transfer Patch file into the CPI defaultRepo.
|
CPI20/admin# copy
tftp://10.x.x.x/PI-Upgrade-2.1.0.0.87.tar.gz disk:/defaultRepo |
Step 4. Check the defaultRepo.
|
CPI20/admin# show repository defaultRepo
CPI20-140806-0330.tar.gpg
CPI20-140813-0330.tar.gpg
PI-Upgrade-2.1.0.0.87.tar.gz ——————-<<< This file
should be present in the defaulRepo before starting the Upgrade |
Step 5. Stoping NCS Services before upgrade.
|
CPI20/admin# ncs stop
Stopping Network Control System…
This may take a few minutes…
Network Control System successfully shutdown.
Plug and Play Gateway is being shut down….. Please
wait!!!
Stop of Plug and Play Gateway Completed!!
SAM daemon process id does not exist
DA daemon process id does not exist
DA syslog daemon process id does not exist
|
Step 7. Initiate the upgrade.
|
CPI20/admin# application upgrade
PI-Upgrade-2.1.0.0.87.tar.gz defaultRepo
Save the current ADE-OS running configuration? (yes/no)
[yes] ?
Generating configuration…
Saved the ADE-OS running configuration to startup
successfully
Please ensure you have a backup of the system before
proceeding.
Proceed with the application upgrade ? (yes/no) [yes] ?
DO NOT press ^C while the upgrade is in progress
Aborting upgrade with a ^C may leave the system in a
unrecoverable state
Initiating Application Upgrade…
Stage 1 of 7:
Transferring file …
— complete.
Stage 2 of 7:
Unpacking file …
— complete.
*** System will reboot after a successful installation
of this package ***
After reboot, please login again into the server to
check status
Stage 3 of 7:
Executing pre-install …
[WARNING] System will reboot after a successful
installation of this package (after Stage 7).
After reboot, please login again into the server to
check status.
No action required at this time. Continuing with Stage
3.
% Repository not found
— complete.
Stage 4 of 7:
Upgrading binaries …
— complete.
Prime Infrastructure
Application installation completed
Stage 5 of 7:
Retrieving system version …
— complete.
Stage 6 of 7:
Updating Database Schema …
:
This could take long time based on the existing data size. Stage 1 of 5: Pre Migration Schema Upgrade …
—
completed at: 2014-08-15 00:21:25.162, Time Taken : 0 hr, 0 min, 17 sec Stage 2 of 5: Schema Upgrade …
: This could
take long time based on the existing data size.
—
completed at: 2014-08-15 00:24:56.716, Time Taken : 0 hr, 3 min, 31 sec Stage 3 of 5: Post Migration Schema Upgrade …
—
completed at: 2014-08-15 00:26:34.534, Time Taken : 0 hr, 1 min, 37 sec Stage 4 of 5: Enabling DB Constraints …
—
completed at: 2014-08-15 00:34:31.834, Time Taken : 0 hr, 7 min, 56 sec Stage 5 of 5: Finishing Up …
—
completed at: 2014-08-15 00:34:44.867, Time Taken : 0 hr, 0 min, 13 sec
— complete.
Stage 7 of 7:
Re-enabling Database Settings …
— complete.
Upgrade Finished. Server is restarting . Please wait ..
% This application Install or Upgrade requires reboot,
rebooting now…
Broadcast message from root (pts/0) (Fri Aug 15
00:38:13 2014):
The system is going down for reboot NOW!
Application upgrade successful
Checking the Code after upgrading
|
Step 8. Verify the OS after reboot.
|
CPI20/admin# show version
Cisco Application Deployment Engine OS Release: 2.0
ADE-OS Build Version: 2.0.6.003-px-build
ADE-OS System Architecture: x86_64
Copyright (c) 2005-2010 by Cisco Systems, Inc.
All rights reserved.
Hostname: CPI20
Version information of installed applications
———————————————
Cisco Prime Infrastructure
——————————————
Version : 2.1.0.0.87
—————————–<<<<< Upgraded Version |