EoMPLS configuration Example

EoMPLS configuration Example




PC1:-

Configuration:-

PC1> show ip
NAME        :
PC1[1]
IP/MASK     :
10.1.1.10/24
GATEWAY     :
255.255.255.0
DNS         :
MAC         :
00:50:79:66:68:00
LPORT       : 10000
RHOST:PORT  :
192.168.56.1:10001
MTU:        : 1500

Verification:-

PC1> ping 10.1.1.2
84 bytes from 10.1.1.2 icmp_seq=1 ttl=255 time=20.748 ms
84 bytes from 10.1.1.2 icmp_seq=2 ttl=255 time=46.277 ms
84 bytes from 10.1.1.2 icmp_seq=3 ttl=255 time=47.200 ms
84 bytes from 10.1.1.2 icmp_seq=4 ttl=255 time=44.257 ms
84 bytes from 10.1.1.2 icmp_seq=5 ttl=255 time=34.722 ms

PC1> ping 10.1.1.3
84 bytes from 10.1.1.3 icmp_seq=1 ttl=255 time=69.798 ms
84 bytes from 10.1.1.3 icmp_seq=2 ttl=255 time=162.311 ms
84 bytes from 10.1.1.3 icmp_seq=3 ttl=255 time=100.966 ms
84 bytes from 10.1.1.3 icmp_seq=4 ttl=255 time=78.673 ms
84 bytes from 10.1.1.3 icmp_seq=5 ttl=255 time=90.670 ms

PC1> ping 10.1.1.11
84 bytes from 10.1.1.11 icmp_seq=1 ttl=64 time=43.250 ms
84 bytes from 10.1.1.11 icmp_seq=2 ttl=64 time=55.295 ms
84 bytes from 10.1.1.11 icmp_seq=3 ttl=64 time=58.007 ms
84 bytes from 10.1.1.11 icmp_seq=4 ttl=64 time=59.030 ms
84 bytes from 10.1.1.11 icmp_seq=5 ttl=64 time=51.903 ms
R1:-

Configuration:-

hostname R1
interface FastEthernet0/0
Description “Connected to PC1”
 switchport access
vlan 100
 spanning-tree
portfast
interface FastEthernet0/1
Description “Connected to R2”
 switchport access
vlan 100
 spanning-tree
portfast
interface Vlan100
 ip address
10.1.1.2 255.255.255.0

R2:-

Configuration:-

ip vrf cust1
 rd 1:1
 route-target
export 1:1
 route-target
import 1:1
interface Loopback0
 ip address 2.2.2.2
255.255.255.255
interface FastEthernet0/1
Description “Connected to R1”
 no ip address
 xconnect 4.4.4.4
100 encapsulation mpls
interface FastEthernet2/0
Description “Connected to R3”
 ip address
23.23.23.2 255.255.255.0
mpls ip
router ospf 10
 log-adjacency-changes
 network 2.2.2.2
0.0.0.0 area 0
 network 23.23.23.2
0.0.0.0 area 0
router bgp 1
 no synchronization
 bgp log-neighbor-changes
 neighbor 4.4.4.4
remote-as 1
 neighbor 4.4.4.4
update-source Loopback0
 no auto-summary
 address-family
vpnv4
  neighbor 4.4.4.4
activate
  neighbor 4.4.4.4
send-community extended
 exit-address-family
mpls ldp router-id Loopback0 force

Verfication:-

R2#sh bgp vpnv4 unicast all summary
BGP router identifier 2.2.2.2, local AS number 1
BGP table version is 1, main routing table version 1
Neighbor       
V           AS MsgRcvd MsgSent   TblVer 
InQ OutQ Up/Down  State/PfxRcd
4.4.4.4        
4            1      54     
54        1    0   
0 00:44:52        0
R2#show mpls forwarding-table
Local     
Outgoing   Prefix           Bytes Label   Outgoing  
Next Hop
Label     
Label      or Tunnel Id     Switched      interface
16         Pop
Label  34.34.34.0/24    0             Fa2/0      23.23.23.3
17         18         4.4.4.4/32       0             Fa2/0      23.23.23.3
18         Pop
Label  3.3.3.3/32       0             Fa2/0      23.23.23.3
19         No
Label   l2ckt(100)       19424         Fa0/1      point2point
R2#show mpls ip binding
  2.2.2.2/32
        in
label:     imp-null
        out
label:    19        lsr: 3.3.3.3:0
        out
label:    16        lsr: 4.4.4.4:0
  3.3.3.3/32
        in
label:     18
        out
label:    imp-null  lsr: 3.3.3.3:0        inuse
        out
label:    18        lsr: 4.4.4.4:0
  4.4.4.4/32
        in
label:     17
        out
label:    18        lsr: 3.3.3.3:0        inuse
        out
label:    imp-null  lsr: 4.4.4.4:0
  23.23.23.0/24
        in
label:     imp-null
        out
label:    imp-null  lsr: 3.3.3.3:0
        out
label:    17        lsr: 4.4.4.4:0
  34.34.34.0/24
        in
label:     16
        out
label:    imp-null  lsr: 3.3.3.3:0        inuse
        out
label:    imp-null  lsr: 4.4.4.4:0
R2#show mpls ldp neighbor
    Peer LDP Ident:
3.3.3.3:0; Local LDP Ident 2.2.2.2:0
        TCP
connection: 3.3.3.3.37189 – 2.2.2.2.646
        State:
Oper; Msgs sent/rcvd: 70/71; Downstream
        Up time:
00:54:39
        LDP
discovery sources:
         
FastEthernet2/0, Src IP addr: 23.23.23.3
        Addresses
bound to peer LDP Ident:
         
23.23.23.3      3.3.3.3         34.34.34.3
    Peer LDP Ident:
4.4.4.4:0; Local LDP Ident 2.2.2.2:0
        TCP
connection: 4.4.4.4.45408 – 2.2.2.2.646
        State:
Oper; Msgs sent/rcvd: 63/61; Downstream
        Up time:
00:46:34
        LDP
discovery sources:
          Targeted
Hello 2.2.2.2 -> 4.4.4.4, active, passive
        Addresses
bound to peer LDP Ident:
         
34.34.34.4      4.4.4.4
R2#show mpls l2transport vc 100
Local intf    
Local circuit              Dest
address    VC ID      Status
————- 
————————– ————— ———- ———-
Fa0/1         
Ethernet                  
4.4.4.4         100       
UP
R2#show mpls l2transport vc 100 detail
Local interface: Fa0/1 up, line protocol up, Ethernet up
  Destination
address: 4.4.4.4, VC ID: 100, VC status: up
    Output
interface: Fa2/0, imposed label stack {18 19}
    Preferred path:
not configured
    Default path:
active
    Next hop:
23.23.23.3
  Create time:
03:20:58, last status change time: 00:46:45
  Signaling
protocol: LDP, peer 4.4.4.4:0 up
    Targeted Hello:
2.2.2.2(LDP Id) -> 4.4.4.4, LDP is UP
    Status TLV
support (local/remote)   :
enabled/supported
      LDP route
watch                   : enabled
      Label/status
state machine        : established,
LruRru
      Last local
dataplane   status rcvd: No fault
      Last local
SSS circuit status rcvd: No fault
      Last local
SSS circuit status sent: No fault
      Last
local  LDP TLV    status sent: No fault
      Last remote
LDP TLV    status rcvd: No fault
      Last remote
LDP ADJ    status rcvd: No fault
    MPLS VC labels:
local 19, remote 19
    Group ID: local
0, remote 0
    MTU: local
1500, remote 1500
    Remote
interface description:
  Sequencing:
receive disabled, send disabled
  Control Word: On
(configured: autosense)
  VC statistics:
    transit packet
totals: receive 3766, send 8667
    transit byte
totals:   receive 275450, send 796027
    transit packet
drops:  receive 0, seq error 0, send 0
R3:-

Configuration:-
hostname R3
interface Loopback0
 ip address 3.3.3.3
255.255.255.255
interface FastEthernet2/0
Description “Connected to R2”
 ip address
23.23.23.3 255.255.255.0
mpls ip
interface FastEthernet2/1
Description “Connected to R4”
 ip address
34.34.34.3 255.255.255.0
mpls ip
router ospf 10
 log-adjacency-changes
 network 3.3.3.3
0.0.0.0 area 0
 network 23.23.23.3
0.0.0.0 area 0
 network 34.34.34.3
0.0.0.0 area 0
mpls ldp router-id Loopback0 force

Verification:-

R3#show mpls ldp neighbor
    Peer LDP Ident:
2.2.2.2:0; Local LDP Ident 3.3.3.3:0
        TCP
connection: 2.2.2.2.646 – 3.3.3.3.37189
        State:
Oper; Msgs sent/rcvd: 74/73; Downstream
        Up time:
00:57:24
        LDP
discovery sources:
         
FastEthernet2/0, Src IP addr: 23.23.23.2
        Addresses
bound to peer LDP Ident:
         
2.2.2.2         23.23.23.2
    Peer LDP Ident:
4.4.4.4:0; Local LDP Ident 3.3.3.3:0
        TCP
connection: 4.4.4.4.49005 – 3.3.3.3.646
        State:
Oper; Msgs sent/rcvd: 63/64; Downstream
        Up time:
00:49:20
        LDP
discovery sources:
         
FastEthernet2/1, Src IP addr: 34.34.34.4
        Addresses
bound to peer LDP Ident:
         
34.34.34.4      4.4.4.4
R3#show mpls forwarding-table
Local     
Outgoing   Prefix           Bytes Label   Outgoing  
Next Hop
Label     
Label      or Tunnel Id     Switched      interface
18         Pop
Label  4.4.4.4/32       180845        Fa2/1      34.34.34.4
19         Pop
Label  2.2.2.2/32       89623         Fa2/0      23.23.23.2
R3#show mpls ip binding
  2.2.2.2/32
        in
label:     19
        out
label:    imp-null  lsr: 2.2.2.2:0        inuse
        out
label:    16        lsr: 4.4.4.4:0
  3.3.3.3/32
        in
label:     imp-null
        out
label:    18        lsr: 2.2.2.2:0
        out
label:    18        lsr: 4.4.4.4:0
  4.4.4.4/32
        in
label:     18
        out
label:    17        lsr: 2.2.2.2:0
        out
label:    imp-null  lsr: 4.4.4.4:0        inuse
  23.23.23.0/24
        in label:     imp-null
        out
label:    imp-null  lsr: 2.2.2.2:0
        out
label:    17        lsr: 4.4.4.4:0
  34.34.34.0/24
        in
label:     imp-null
        out
label:    16        lsr: 2.2.2.2:0
        out
label:    imp-null  lsr: 4.4.4.4:0
R3#sh ip ospf neighbor
Neighbor ID    
Pri   State           Dead Time   Address         Interface
4.4.4.4          
1   FULL/DR         00:00:36    34.34.34.4      FastEthernet2/1
2.2.2.2          
1   FULL/DR         00:00:32   
23.23.23.2      FastEthernet2/0
R3#show ip route
Codes: L – local, C – connected, S – static, R – RIP, M –
mobile, B – BGP
       D – EIGRP,
EX – EIGRP external, O – OSPF, IA – OSPF inter area
       N1 – OSPF
NSSA external type 1, N2 – OSPF NSSA external type 2
       E1 – OSPF
external type 1, E2 – OSPF external type 2
       i – IS-IS,
su – IS-IS summary, L1 – IS-IS level-1, L2 – IS-IS level-2
       ia – IS-IS
inter area, * – candidate default, U – per-user static route
       o – ODR, P –
periodic downloaded static route, H – NHRP
       + –
replicated route, % – next hop override
Gateway of last resort is not set
      2.0.0.0/32 is
subnetted, 1 subnets
O        2.2.2.2
[110/2] via 23.23.23.2, 00:54:20, FastEthernet2/0
      3.0.0.0/32 is
subnetted, 1 subnets
C        3.3.3.3 is
directly connected, Loopback0
      4.0.0.0/32 is
subnetted, 1 subnets
O        4.4.4.4
[110/2] via 34.34.34.4, 00:51:06, FastEthernet2/1
      23.0.0.0/8 is
variably subnetted, 2 subnets, 2 masks
C       
23.23.23.0/24 is directly connected, FastEthernet2/0
L       
23.23.23.3/32 is directly connected, FastEthernet2/0
      34.0.0.0/8 is
variably subnetted, 2 subnets, 2 masks
C       
34.34.34.0/24 is directly connected, FastEthernet2/1
L        34.34.34.3/32 is directly connected,
FastEthernet2/1
R4:-
Configuration:-
ip vrf cust1
 rd 1:1
 route-target
export 1:1
 route-target
import 1:1
interface Loopback0
 ip address 4.4.4.4
255.255.255.255
interface FastEthernet0/1
Description “Connected to R5”
 no ip address
xconnect 2.2.2.2 100 encapsulation mpls
interface FastEthernet2/1
Description “Connected to R3”
 ip address
34.34.34.4 255.255.255.0
 speed auto
 duplex auto
 mpls ip
router ospf 10
 log-adjacency-changes
 network 4.4.4.4
0.0.0.0 area 0
 network 34.34.34.4
0.0.0.0 area 0
router bgp 1
 no synchronization
 bgp
log-neighbor-changes
 neighbor 2.2.2.2
remote-as 1
 neighbor 2.2.2.2
update-source Loopback0
 no auto-summary
 address-family
vpnv4
  neighbor 2.2.2.2
activate
  neighbor 2.2.2.2
send-community extended
 exit-address-family
mpls ldp router-id Loopback0 force
Verification:-


R5:-

Configuration:-

interface
FastEthernet0/0
Description “Connected to PC2”
 switchport access vlan 100
interface
FastEthernet0/1
Description “Connected to R4”
 switchport access vlan 100
interface
Vlan100
 ip address 10.1.1.3 255.255.255.0

Verification:-
R5# ping 10.1.1.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.1.2, timeout is 2
seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max
= 92/126/208 ms
R5#ping 10.1.1.10
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.1.10, timeout is 2
seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max
= 92/119/180 ms
R5#show spanning-tree vlan 100 summary
Root bridge for VLAN100 is 32768.cc01.0ec0.0000.
PortFast BPDU Guard is disabled
UplinkFast is disabled
BackboneFast is disabled
Name                
Blocking Listening Learning Forwarding STP Active
——————– ——– ——— ——–
———- ———-
VLAN100             
0        0         0        2          2
R5#show spanning-tree vlan 100 brief
VLAN100
  Spanning tree
enabled protocol ieee
  Root ID    Priority   
32768
            
Address     cc01.0ec0.0000
            
Cost        19
            
Port        2 (FastEthernet0/1)
             Hello
Time   2 sec  Max Age 20 sec  Forward Delay 15 sec
  Bridge ID  Priority   
32768
            
Address     cc05.1c8c.0001
             Hello
Time   2 sec  Max Age 20 sec  Forward Delay 15 sec
             Aging
Time 300
Interface                                   Designated
Name                
Port ID Prio Cost  Sts Cost  Bridge ID            Port ID
——————– ——- —- —– — —–
——————– ——-
FastEthernet0/0     
128.1    128    19 FWD   
19 32768 cc05.1c8c.0001 128.1
FastEthernet0/1     
128.2    128    19 FWD    
0 32768 cc01.0ec0.0000 128.2
PC2:-

Configuration:-

PC2> show ip
NAME        :
PC2[1]
IP/MASK     :
10.1.1.11/24
GATEWAY     :
255.255.255.0
DNS         :
MAC         :
00:50:79:66:68:01
LPORT       : 10010
RHOST:PORT  :
192.168.56.1:10011
MTU:        : 1500

Verification:-
PC2> ping 10.1.1.3
84 bytes from 10.1.1.3 icmp_seq=1 ttl=255 time=44.685 ms
84 bytes from 10.1.1.3 icmp_seq=2 ttl=255 time=39.397 ms
84 bytes from 10.1.1.3 icmp_seq=3 ttl=255 time=30.531 ms
84 bytes from 10.1.1.3 icmp_seq=4 ttl=255 time=29.676 ms
84 bytes from 10.1.1.3 icmp_seq=5 ttl=255 time=29.988 ms
PC2> ping 10.1.1.2
84 bytes from 10.1.1.2 icmp_seq=1 ttl=255 time=88.275 ms
84 bytes from 10.1.1.2 icmp_seq=2 ttl=255 time=83.330 ms
84 bytes from 10.1.1.2 icmp_seq=3 ttl=255 time=105.148 ms
84 bytes from 10.1.1.2 icmp_seq=4 ttl=255 time=73.325 ms
84 bytes from 10.1.1.2 icmp_seq=5 ttl=255 time=61.766 ms
PC2> ping 10.1.1.10
84 bytes from 10.1.1.10 icmp_seq=1 ttl=64 time=40.029 ms
84 bytes from 10.1.1.10 icmp_seq=2 ttl=64 time=82.339 ms
84 bytes from 10.1.1.10 icmp_seq=3 ttl=64 time=50.745 ms
84 bytes from 10.1.1.10 icmp_seq=4 ttl=64 time=40.292 ms
84 bytes from 10.1.1.10 icmp_seq=5 ttl=64 time=61.310 ms

For More Blogs:- Please visit www.Hevitech.com